Pre-Application Preparation: Ensure a clean surface by thoroughly removing any traces of oil, grease, fat, fingerprints, etc., using a Leather Cleaner.

Tools Required: In addition to the coating material, prepare an applicator pad and a microfiber towel.

Application Method:

Apply an adequate amount of the coating material onto the applicator pad, ensuring it’s sufficiently primed for even distribution. If the applicator feels “stuck”, apply more material as needed.
Commence by outlining the area for application, starting from the surface edges. Then, create a central X shape to facilitate uniform coverage.
Employ crisscross motions to spread the material along the X and Y axes, ensuring thorough coverage.

Buffing Phase: To promote strong adhesion, refrain from wiping the coating immediately post-application. Allow it to soak in before proceeding. Use the microfiber towel to swiftly remove excess material in straight lines; speed is key at this stage, with no need for perfection. Subsequently, flip the towel to buff the surface in circular motions, ensuring no high spots remain.

Curing Times:
Tack-Free: 30 minutes
Initial Curing: 12/24 hours (weather-dependent)
First Wash: 14 days
Full Curing: 30 days